Used to stabilize the chimney along a vertical wall. The maximum recommended spacing between wall bands is 10’-0” (3048mm).
| Includes: | 2- Wall brackets |
| 2- Stabilizing angles |
 |
 |
Used to stabilize the chimney along a vertical wall. The maximum recommended spacing between wall bands is 10’-0” (3048mm).
|
|
Used to stabilize and support a flue or chimney in vertical runs. It avoids the transfer of the flue weight to the appliance. To be used with threaded rods (not included).
|
|
Used to stabilize a chimney laterally where it extends more than 10’-0” (3048mm) above the roof or for locations exposed to strong winds. It is attached to the chimney and the roof curb and does not require anchoring to the roof.
|
|
Used to stabilize a chimney laterally where it extends more than 10’-0” (3048mm) above the roof or for locations exposed to strong winds. It is attached to the chimney and is designed to receive 3 guy wires 120¾ apart (not included). It may be manufactured to receive 4 guy wires 90¾ apart.
|
 |
 |
