Lengths

• Straight Lengths
• Variable Length
• Ajustable Length
• Duct Drain
• Nozzle Section

Straight Lengths (48L, 36L, 24L et 12L)

Available in 22 diameters from 6 to 48” (152 to 1219mm). Standard lengths: 48” (1219mm), 36” (914mm), 24” (610mm) and 12” (305mm).

K=0.25 L/D
L=Pipe length in feet
D=Pipe diameter in inches

		I.D. O.D. in mm in mm 6 152 10 254 8 203 12 305 10 254 14 356 12 305 16 406 14 356 18 457 16 406 20 508 18 457 22 559 20 508 24 610 22 559 26 660 24 610 28 711 26 660 30 762 28 711 32 813 30 762 34 864 32 813 36 914 34 864 38 965 36 914 40 1016 38 965 42 1067 40 1016 44 1118 42 1067 46 1168 44 1118 48 1219 46 1168 50 1270 48 1219 52 1321
	LENGTHS EFFECTIVE LENGTHS "A" in mm 12" (305mm) 9.750 248 24" (610mm) 21.750 552 36" (914mm) 33.750 857 48" (1219mm) 45.750 1162

Variable Length (VL)

Used to absorb linear expansion between two fixed points on low pressure applications.

K=Same as pipe length

Ajustable Length (AL)

Used to complete on site installation precisely. It is not designed to compensate for linear expansion nor to support the vertical load of the grease duct or conduit.

K=Same as pipe length

Duct Drain (DD)

Used to collect rainwater or condensation water from inside horizontal grease duct or conduit. To be
connected to a drain of 3/4ӯ (19mm) РNPT.

K=Same as pipe length

Nozzle Section (NS)

Used to suppress fire or to connect to a cleaning system. To be connected to a drain of 1ӯ (25mm) РNPT.

K = Same as pipe length