|
|
Model IPPL2
IPPL2 model Industrial Positive Pressure
is a double wall stainless steel chimney with 2" mineral fiber insulation.
This chimney is UL listed for positive pressure applications up to 60"
water column.
Features
- Inner wall: standard 304 2B stainless steel (20 gauge - 6" to
40" diameter; 18 gauge - 42" to 48" diameter)
- Outer wall: standard 304 2B stainless steel (24 gauge - 6" to
40" diameter; 20 gauge - 42" to 48" diameter)
- Continuous plasma-weld
- Full range of accessories including elbows, fittings, guides and supports.
Applications
- Building Heating Appliance Chimney Listing (1000°F Chimney
Listing) – under this category, models IPPL, IPPL2 and
IPPL2F, have been determined suitable for venting flue gases at a temperature
not exceeding 540°C (1000°F) under continuous operating conditions,
from gas, liquid, oil or solid fuel fired appliances.
- Building Heating Appliance Chimneys are suitable for use with Building
Heating Appliances and Low Heat Appliances as described in the Chimney
Selection Chart of National Fire Protection Association (NFPA) Standard
No. 211.
- 1400°F Chimney Listing – under this category,
models IPPL and IPPL2F, have been determined suitable for venting flue
gases at a temperature not exceeding 760°C (1400°F) under continuous
operating conditions. As such, they are suitable for use with ovens
and furnaces as described in the Chimney Selection Chart of NFPA No.
211, in addition to other applications.
| Criteria |
Grease Duct |
Restaurant BHA Chimney |
1400°F Chimney |
| Application |
- Cooking Appliances
- Ventilation Hoods
- Restaurant Grease Ducts
- Pizza Oven Exhausts
|
- Low and High Pressure Steam Boilers
- Diesel and Turbine
Exhausts
- Building Heating Equipment
|
- Industrial furnaces
- Processing Equipment
- Kilns and Ovens
- Diesel and Turbine Exhaust
- Incinerator
- Coffee Roaster
|
Continuous operating
temperature |
500°F |
1000°F |
1400°F |
| IPPL |
Yes |
Yes |
Yes |
| IPPL2 |
N/A |
Yes |
N/A |
| IPPL2F |
Yes |
Yes |
Yes |
Weights and Clearances
| IPPL • IPPL2 • IPPL2F |
LINEAR WEIGHT |
| I.D. |
O.D. |
AREA |
IPPL |
IPPL2 |
IPPL2F |
| in |
mm |
in |
mm |
in2 |
1000 mm2 |
lb/ft |
kg/m |
lb/ft |
kg/m |
lb/ft |
kg/m |
| 6 |
152 |
10 |
254 |
28 |
18.2 |
5.4 |
8.0 |
8.8 |
13.1 |
8.8 |
13.1 |
| 8 |
203 |
12 |
305 |
50 |
32.4 |
6.8 |
10.1 |
11.0 |
16.4 |
11.0 |
16.4 |
| 10 |
254 |
14 |
356 |
79 |
50.7 |
8.2 |
12.2 |
13.3 |
19.8 |
13.3 |
19.8 |
| 12 |
305 |
16 |
406 |
113 |
73.0 |
9.6 |
14.3 |
15.6 |
23.2 |
15.6 |
23.2 |
| 14 |
356 |
18 |
457 |
154 |
99.3 |
11.0 |
16.4 |
17.8 |
26.5 |
17.8 |
26.5 |
| 16 |
406 |
20 |
508 |
201 |
129.7 |
12.5 |
18.5 |
20.1 |
29.9 |
20.1 |
29.9 |
| 18 |
457 |
22 |
559 |
254 |
164.2 |
13.9 |
20.6 |
22.4 |
33.3 |
22.4 |
33.3 |
| 20 |
508 |
24 |
610 |
314 |
202.7 |
15.3 |
22.7 |
24.6 |
36.6 |
24.6 |
36.6 |
| 22 |
559 |
26 |
660 |
380 |
245.2 |
16.7 |
24.8 |
26.9 |
40.0 |
26.9 |
40.0 |
| 24 |
610 |
28 |
711 |
452 |
291.9 |
18.1 |
26.9 |
29.2 |
43.4 |
29.2 |
43.4 |
| 26 |
660 |
30 |
762 |
531 |
342.5 |
19.5 |
29.1 |
31.4 |
46.7 |
31.4 |
46.7 |
| 28 |
711 |
32 |
813 |
616 |
397.3 |
20.9 |
31.2 |
33.7 |
50.1 |
33.7 |
50.1 |
| 30 |
762 |
34 |
864 |
707 |
456.0 |
22.4 |
33.3 |
36.0 |
53.6 |
36.0 |
53.6 |
| 32 |
813 |
36 |
914 |
804 |
518.9 |
23.8 |
35.4 |
38.2 |
56.8 |
38.2 |
56.8 |
| 34 |
864 |
38 |
965 |
908 |
585.8 |
25.2 |
37.5 |
40.5 |
60.3 |
40.5 |
60.3 |
| 36 |
914 |
40 |
1016 |
1018 |
656.7 |
26.6 |
39.6 |
42.8 |
63.7 |
42.8 |
63.7 |
| 38 |
965 |
42 |
1067 |
1134 |
731.7 |
28.0 |
41.7 |
45.0 |
67.0 |
45.0 |
67.0 |
| 40 |
1016 |
44 |
1118 |
1257 |
810.7 |
29.4 |
43.8 |
47.3 |
70.4 |
47.3 |
70.4 |
| 42 |
1067 |
46 |
1168 |
1385 |
893.8 |
30.8 |
45.9 |
49.6 |
73.8 |
49.6 |
73.8 |
| 44 |
1118 |
48 |
1219 |
1521 |
981.0 |
32.3 |
48.0 |
51.8 |
77.1 |
51.8 |
77.1 |
| 46 |
1168 |
50 |
1270 |
1662 |
1072.2 |
33.7 |
50.1 |
54.1 |
80.5 |
54.1 |
80.5 |
| 48 |
1219 |
52 |
1320 |
1810 |
1167.5 |
35.1 |
52.2 |
56.4 |
83.9 |
56.4 |
83.9 |
| MINIMUM
CLEARANCE AIR SPACE TO COMBUSTIBLE CONSTRUCTION |
| MODEL IPPL |
|
MODEL IPPL2 |
MODEL IPPL2F |
| Inside Diameter |
Clearance |
Inside Diameter |
Clearance |
Clearance |
| (1000°F and 1400°F) |
|
(1000°F) |
(1000°F and 1400"F) |
|
| 6" to 12" |
4" |
6" to 12" |
1" |
1" |
| 14" |
5" |
14" |
1.5" |
1.5" |
| 16" to 18" |
6" |
16" to 18" |
2" |
2" |
| 20" to 24" |
7" |
20" to 22" |
3" |
3" |
| 26" to 28" |
8" |
24" to 26" |
4" |
4" |
| 30" to 34" |
9" |
28" to 32" |
5" |
5" |
| 36" to 38" |
10" |
34" to 36" |
6" |
6" |
| 40" to 48" |
11" |
38" to 40" |
7" |
7" |
| |
|
42" to 48" |
8" |
8" |
Listings
CHEMINEE LINING.E inc. venting systems models IPPL,
IPPL2 and IPPL2F are listed by Underwriters
Laboratories, inc. (UL) under file MH26661 and tested in accordance with
UL 103 Standard for Factory-Built Chimneys for Residential Type and Building
Heating Appliances and the Canadian Standard for 540°C (1000°F)
and 760°C (1400°F) industrial Chimneys CAN/ULC-C959. These models
are also suitable for use in positive pressure applications up to 60”
water column. Listings include the following chimney product categories
and diameters..
UL 103
| Models IPPL2 • IPPL2F |
Temperature |
Diameter |
| Building Heating Appliance Type Chimney |
1000°F continuous |
6" to 48" ID |
| 1400°F Chimney (Models IPPL and IPPL2F
only) |
1400°F continuous |
6" to 48" ID |
CAN/ULC C-959
| Models IPPL • IPPL2 • IPPL2F |
Temperature |
Diameter |
| Building Heating Appliance Type Chimney |
1000°F continuous |
6" to 48" ID |
| 1400°F Chimney (Models IPPL and IPPL2F
only) |
1400°F continuous |
6" to 48" ID |
Sample Specification (Boiler Exhaust)
The chimney and flue must meet ULC (Underwriters Laboratories
of Canada) and UL-103 (Underwriters Laboratories Inc.) section 22A for
positive pressure exhaust system up to 60” water column and carry
the appropriate approval labels. The chimney shall be listed by UL as
a “B.H.A.” (Building heating appliance) chimney for continuous
operation up to 1000°F (540°C) maximum. For applications above
1000°F (540°C), the chimney shall be listed by UL as a “1400°F
chimney” for continuous operation up to 1400°F (760°C) maximum.
The chimney and flue components must be of double wall construction and
properly designed for positive pressure exhaust. The inner wall must be
of 20 gauge (18 gauge – 42” to 48” diameter) 304 stainless
steel, with continuous plasma welds. The outer wall must be of 24 gauge
(20 gauge – 42” to 48” diameter) 304 stainless steel.
A high temperature insulation (2 in.) must be installed between walls.
The jointing must be made using an assembly band, a finishing band and
an appropriate sealing material, as supplied by the manufacturer. Quality
required : Model IPPL2.
All components must be installed according to the manufacturer
recommendations and must meet the NFPA and local safety code requirements.
Components
|
|
